A companion to the book, this
22" x 17" wall chart
documents for the first time ever the complete audio signal flow diagram of both hardware and software in a modern PC. Created by David Roach and Wayne Jones
Audio Fidelity tests required for Vista Logo after June 1, 2007
After June 1, 2007 all systems submitted for Vista logo must pass all of the audio fidelity tests included in
Windows Logo Kit (WLK) 1.0.b
, including the newly introduced phase delay test.
System vendors have the option to purchase an Audio Precision analyzer in order to run these tests in-house, or to have the testing performed in a separate facility already equipped with an Audio Precision, such as
Optimal Sound's testing facility
. In order to use an external facility for system logo tests, the motherboard and BIOS must be identical to the system provided to the test facility, and plugs must be inserted into all jacks while importing the test logs.
Click here
to see a table containing all of the Vista audio fidelity requirements.
Other audio logo tests that are required as of June 1 include
- AUDIO-0006 - Audio solution delivers a premium high-fidelity audio experience
- SYSFUND-0118 - Premium system audio solution delivers a high-fidelity audio experience
- AUDIO-0025 - Digital audio record and playback meet basic performance requirements for audio device
- AUDIO-0008 - Standalone microphone array device complies with the Microsoft USB Audio 1.0 design guidelines and Microsoft Microphone Array Design Guidelines
- SYSFUND-0067 - System that includes microphone array hardware follows the Microsoft microphone array hardware design guidelines
- AUDIO-0011 - A single HD Audio codec port is used for a single connector
- SYSFUND-0139 - A single HD Audio codec port is used for a single connector
- AUDIO-0017 - HD Audio solution supports jack-presence detection for analog jacks
- AUDIO-0020 - Pin configuration register for an HD Audio codec has specific settings for port connectivity field depending on implementation
- AUDIO-0022 - HD Audio Codec Pin configuration register defaults: Sequence numbers within the same default association are unique
- SYSFUND-0049 - System uses the HD Audio device pin configuration registers to expose logical devices supported by the Windows UAA HD Audio class driver
- SYSFUND-0047 - System includes hardware for at least two capture and render scenarios
- SYSFUND-0048 - Noise on the signal from the audio device generated by system components is -80dB FS or better
- SYSFUND-0050 - System employs anti-pop measures on all system audio outputs
Only audio fidelity test logs can be imported, all other tests must be run together on the primary system under test.
Click here
to see additional details from Microsoft on the audio logo requirements going Into effect as of June 1, 2007.
Optimal Sound provides testing and failure analysis services for the audio fidelity Logo tests for Windows Vista.
Click here
for more info.
News about HD Audio and Windows* Vista*
|
Microsoft Releases Updated Guide to Array Microphone Implementation
A major update to this white paper from Microsoft provides previously-unavailable details on how the Acoustic Echo Cancellation and Microphone-Array Beamforming processing built into Windows Vista is implemented, as well as how to test it and use it. For more info,
click here.
|
| Microsoft Releases New Microphone Array Verification Tool
Microsoft has released a command-line tool which can verify whether an audio driver accurately reports microphone-array geometry information and whether the Voice Capture DMO operating in microphone-array mode processes the captured data accurately.
For more info,
click here.
|
| Microsoft includes built-in Acoustic Echo Cancellation and Microphone Array Processing in Vista
As part of DirectShow 9, Microsoft has included Vista-only source code with the new Windows SDK. This source code can be compiled to create a test app which demonstrates the Acoustic Echo Cancellation DMO. While initially intended for use with USB-based array microphones, guidelines are provided for HD Audio implementation as well. For more info,
click here. |
| Microsoft Documents Limit on DTM Test Storage, outlines possible solutions
Driver Test Manager (DTM) is the new logo testing infrastructure used for both Windows Vista and Windows XP logo submissions. The default installation is limited to 2 GB of storage, which is enough to get started, but probably not enough for serious DTM users. To find out more options,
click here. |
Microsoft includes Audio System Effects in Vista
Microsoft has released an updated white paper on how to use the Audio System Effects that are included at no charge in Windows Vista. In-box built-in effects include
Loudness Equalization DSP (LFX)
Forward Bass Management (LFX)
Reverse Bass Management (LFX)
Low Frequency Protection (LFX)
Speaker Fill (LFX)
Room Correction (GFX)
Virtual Surround (LFX)
Speaker Phantoming (LFX)
Virtualized Surround Sound over Headphones (LFX)
Bass Boost (LFX)
For more details,
click here. |
| Microsoft WHQL postpones date that systems must pass
audio fidelity tests
On Thursday, August 30, Microsoft's Hardware newsletter announced that systems will not be required to pass the audio fidelity portion of the logo tests until June 1st, 2007. However, all submissions must include complete logs from the audio fidelity tests, which requires an Audio Precision System 2 test set to be connected to the DTM test environment.
For more info,
click here. |
|
| Audio Fidelity Testing Now Required for Vista Audio Device Logo
Microsoft has released Windows Logo Program (WLP) specification 3.07, which has significant impact on the audio development and logo submission process for Windows Vista. Audio devices and drivers are now required to included passing audio fidelity test logs in order to qualify for device logo. For more info,
click here.
|
| Windows Vista RC2 to be released October 6, 2006
Recently disclosed details of Windows Vista RC2 release indicate that Vista build 5743 will be released Friday, October 56, 2006, and will be designated as Vista Release Candidate 2 (RC2).
For more info,
click here.
|
| Audio Design Line Publishes excerpt from HD Audio Book
EE Times affiliate Audio Design Line, has reprinted Chapter 9 of the new book from Intel Press,
High Definition Audio for the Digital Home: Proven Techniques for Getting It Right the First Time
by David Roach, Scott Janus, and Wayne Jones. This chapter of the book describes the complete signal audio signal path of a modern PC, including both hardware and software audio components. For more info,
click here. |
|
Microsoft publishes sample code for 3 different Audio System Effects
Microsoft has released sample code for three different sample Audio System Effects along with a retitled document describing how to use them. For more info,
click here. |
|
Microsoft Multimedia VP Amir Majidimehr writes about Audio System Effects included in Windows Vista
Read first-hand the thinking behind the new Audio System Effects included in Windows Vista. For more info,
click here. |
|
Microsoft Channel 9 Video on audio hardware for Windows Vista features Hakon Strande and David Roach
Check out the 38-minute Channel 9 video featuring Hakon Strande of Microsoft and David Roach of Optimal Sound discussing the audio hardware in Vista. For more info,
click here. |
|
Microsoft Releases HD Audio Pin Configuration Test Guidelines
Microsoft has released a paper entitled Microsoft HD Audio Pin Configuration Implementation Test Procedure Guidelines. The paper describes how to use a Microsoft-supplied pin configuration utility to generate and validate a set of verb tables which is embedded in the system BIOS. The verb table describes the audio configuration of the system. If the verb table is configured incorrectly, the UAA HD Audio class driver will not function properly and the Windows Vista logo tests will fail. For more info,
click here.
|
|
